ABSTRACT
The effect of annealing atmosphere on the supercapacitance behavior of iron oxide nanotube (Fe-NT) electrodes has been explored and reported here. Iron oxide nanotubes were synthesized on a pure iron substrate through an electrochemical anodization process in an ethylene glycol solution containing 3% H2O and 0.5 wt.% NH4F. Subsequently, the annealing of the nanotubes was carried out at 500 °C for 2 h in various gas atmospheres such as air, oxygen (O2), nitrogen (N2), and argon (Ar). The morphology and crystal phases evolved after the annealing processes were examined via field emission scanning electron microscopy, x-ray diffraction, Raman spectroscopy, and x-ray photoelectron spectroscopy. The electrochemical capacitance properties of the annealed Fe-NT electrodes were evaluated by conducting cyclic voltammetry (CV), galvanostatic charge-discharge, and electrochemical impedance spectroscopy tests in the Li2SO4 electrolyte. Based on these experiments, it was found that the capacitance of the Fe-NT electrodes annealed in air and O2 atmospheres shows mixed behavior comprising both the electric double layer and pseudocapacitance. However, annealing in N2 and Ar environments resulted in well-defined redox peaks in the CV profiles of the Fe-NT electrodes, which are therefore attributed to the relatively higher pseudonature of the capacitance in these electrodes. Based on the galvanostatic charge-discharge studies, the specific capacitance achieved in the Fe-NT electrode after annealing in Ar was about 300 mF cm(-2), which was about twice the value obtained for N2-annealed Fe-NTs and three times higher than those annealed in air and O2. The experiments also demonstrated excellent cycle stability for the Fe-NT electrodes with 83%-85% capacitance retention, even after many charge-discharge cycles, irrespective of the gas atmospheres used during annealing. The increase in the specific capacitance was discussed in terms of increased oxygen vacancies as a result of the enhanced transformation of the hematite (α-Fe2O3) phase to the magnetite (Fe3O4) phase for the electrodes annealed in the N2 and Ar atmospheres.
ABSTRACT
The present study focuses on understanding of the principle of interaction of explosive molecule triacetonetriperoxide (TATP) with metal sensitized TiO2 nanotube composite material through theoretical modeling. This effort has also been extended in developing a laboratory scale sensor set up to detect TATP based on comprehensive computational modeling outcome and subsequent experimentation. Sensing mechanism depends on the nature of metal, where the TATP interaction with metal functionalized TiO2 prompts a change in conductivity of the sensor platform. Therefore, a metal with higher affinity towards TATP would enhance the conductance, thereby promoting the efficiency of the sensor platform. DFT methodology has been used to identify metal with high affinity to TATP. It was found that Co(2+) metal ion shows significantly higher affinity towards TATP, selected from an array of metal ions with different valency, from monovalent to tetravalent. The preliminary experimental data also suggests that Co(2+) ion detects TATP by inducing a change in conductivity of the sensor substrate.
Subject(s)
Biosensing Techniques/methods , Explosive Agents/analysis , Heterocyclic Compounds, 1-Ring/analysis , Models, Theoretical , Nanostructures/chemistry , Peroxides/analysis , Titanium/chemistry , Cobalt/chemistryABSTRACT
Bismuth oxide (Bi2O3) decorated titania nanotube array (T-NT) composite materials were synthesized by a simple, yet versatile electrodeposition method. The effects of deposition current density and time on morphology evolution of the bismuth oxide phase were analyzed. It was found that an optimum deposition condition in terms of current density and time could be reached to achieve uniform and equiaxed crystal morphology of the deposited oxide phase. The morphology, shape, size distribution, and crystal structure of the bismuth oxide phase were evaluated using scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopic techniques. The electrochemical capacitance of the T-NT/Bi2O3 composites was studied by conducting cyclic voltammetry and galvanostatic charge-discharge experiments. These studies indicated that the capacitance behavior of the composite material was dependent on the morphology and distribution of the bismuth oxide phase. The capacitance was greatly enhanced for the composite having equiaxed and uniformly distributed bismuth oxide particles. The maximum interfacial capacitance achieved in this study was approximately 430 mF cm(-2). Galvanostatic charge-discharge experiments conducted on the composite materials suggested stable capacitance behavior together with excellent capacitance retention even after 500 cycles of continuous charge-discharge operation.
ABSTRACT
Metal oxide nanotubes have become a widely investigated material, more specifically, self-organized titania nanotube arrays synthesized by electrochemical anodization. As a highly investigated material with a wide gamut of applications, the majority of published literature focuses on the solar-based applications of this material. The scope of this review summarizes some of the recent advances made using metal oxide nanotube arrays formed via anodization in solar-based applications. A general methodology for theoretical modeling of titania surfaces in solar applications is also presented.
ABSTRACT
Self-assembled arrays of titania nanotubes are synthesized via electrochemical anodization of Ti foils under the presence of UV-vis irradiation. Compared to control samples (anodized without light), the light-assisted anodized samples exhibit larger diameters as well as thicker nanotube walls, whereas the length of the nanotubes remains the same under otherwise similar synthesis conditions. Enhanced photoelectrochemical performance with light-assisted anodized samples under simulated AM 1.5 irradiation is observed by an increase in photocurrent density of 45-73% at 1.23 V (RHE). The enhanced photoelectrochemical performance is correlated to improved charge separation analyzed by Mott-Schottky. A mechanism on the photoeffect during anodization is presented. The morphology and improved properties obtained from the synthesis methodology may also find application in other fields such as sensing and catalysis.
